Back to Home Rock-It Man Products Custom Fabs Photo Gallery About Us Contact
Front Bumper Rear Bumper/Carrier Rockers
Our rear bumpers & carriers survive the beating and even fight back!
Additional Photos
Don't miss our rear bumper photo gallery.
  Rear Bumper & Swing-Out
Using the Rock-It Man™ Rear Rock bumper as a foundation, we have added a swing-out tire carrier using 2x3 for the main tube and 2x2 for the “A” frame. A telescopic wheel mount comes standard for different wheel backspacing. A 2000-pound De-Sta-Co Latch™ does the job of keeping the swing out secure while a special “Nylatron” bushing keeps the swing in “swing-out!”
Our hinge pin is your run of the mill 3⁄4” grade-8 which has a sheer strength of 54,700 pounds. That means is you would need 54,700 pounds of force to sheer the bolt in 2 pieces! And with our double sheer hinge design that number is increased; due to the load being placed at two separate points.
©2003-2007 Rock-It Man Fabrication. All rights reserved.

Rear Bumper
Our rear bumpers are made from the same 2x5x3/16” rectangular steel as our front bumpers. Two "D" ring shackle mounts come standard (mounting options of either horizontal or vertical) and pass through the bumper. They are welded in front and back for maximum strength in off-road recovery situations!

Our unique mounting system puts the bumper at ONLY 3⁄4" from the cross member. This allows for maximum departure angle and actually picks up approx. 2" over a stock bumper. Standard width is 58" and custom sizes are available. Our rear bumpers utilize the stock, factory mounting locations. No drilling is required.

Rock-It Man Bumpers and Tire Carrier are no longer in production. Please contact us for other bumper and swingout choices. Thank You, Chris @ Rock-It Man